The process can take a few minutes.Ĭaution: Leave the SD card connected for the next steps! Figure 1: Flashing Retropie to your SD cards using Etcher Installation of the GPI case patch After downloading, open the Etcher program and select the. If you are using the Raspberry Pi Zero 1.3 / W, click on “Raspberry Pi 0/1”. Go to the Retropie page and download the Retropie operating system.
Raspberry pi emulator for mac install#
If this is the case, the installation of retropie can begin.ĭownload the Etcher program and install it on your PC. Installation of the operating systemįirst, make sure that the microSD card can be connected to your computer. Make sure that the microSD card is not inserted and do not switch on the game console yet. Illustrated instructions are available at Retroflag. Finally, the housing is closed and screwed down.
To do this, the Raspberry Pi Zero must be inserted into the housing, then the existing PBC board is placed over the Pi Zero and the ribbon cable is connected. Assemblyįirst, the Raspberry Pi has to be built into the game cassette and connected to the LCD screen. Only three batteries are required for this set. Reichelt elektronik also offers the GPI Case as a bundle. We also recommend that you install three high-quality AA batteries. 32GB, is very useful to install a lot of games. A Raspberry Pi Zero 1.3 or Zero W is required to put the product into operation. This product is just a case with an integrated display and gamepad. Retroflag’s GPI case bundle contains the following parts: In this how-to we will guide you step by step in the construction of a retro game console, starting with the assembly up to the installation of the games. Retroflag has reworked what is probably the best known handheld game console from back then with the latest technology. Retro Feeling: the GPI Case from Retroflag